Product Carousel Tabs
Mountain 72V 12000W enduro e bike
Manufacturer Name | Enduro E Bikes |
Model Name | 12000W light electric dirt bike |
Model Year | 2020 |
Motor Manufacturer | Enduro E Bikes |
Motor Model | Enduro E Bikes rear direct brushless motor |
Motor Power | 12kW (13hp, 31.1 ft-lbs equivalent) |
Motor Placement | Rear hub drive |
Controller | Sine Wave |
Power Pack | Panasonic Cells |
Battery Capacity | 72V 48Ah |
Battery Removal | Easy slide out |
Range | 32 miles |
Ride Mode | Throttle, pedal |
Regenerative Braking | N/A |
Throttle | Variable twist throttle |
Gears | 1 |
Top speed | 74.5mph |
Weight | 136.6lbs |
Materials | Steel, aircraft-grade aluminum |
Seat height | 25 inches |
Suspension | ZOOM AMS Downhill suspension forks DNM Burner-RCP 2S rear suspension |
Display | Full color TFT display (speedometer, odometer, tachometer, time, temperature, and power economy) |
Purpose | Dirt, Mud, Sand |
Connectivity | N/A |
Security | Keyed ignition |
yamaha boat

Weight 4,680 LBS
Beam 8′ 6″
Draft 19″
Dead Rise 20°
In-Water Height (Bridge Clearance) 8’1″
Seating Capacity/Weight Capacity 12/2,350 LBS
Storage Capacity 613 GAL
Integrated Swim Platform
Upholstered Cushioned Seats
Upholstered Cushioned Backrests Upgraded Upholstery
12-volt Outlet
Stainless Steel Telescopic Reboarding Ladder
Dinette Table Mount
Marine-Grade Mat Custom Cut
Stern (Wet) Storage
SEA DOO RXP X 300
TECHNICAL SPECIFICATIONS:
LENGTH (FT) 10.88
WIDTH (IN/MM) 49.2 / 1250
HEIGHT (IN/MM) 44 / 1110
DRY WEIGHT (LBS/KG) 780 / 354
FUEL CAPACITY (GAL/L) 18.5 / 70
STORAGE CAPACITY (CUFT/GAL/L) 4.8 / 40.6 / 153.7
SEATS:
NUMBER OF SEATS 2
EXTERIOR:
BODY MATERIAL Fiberglass Reinforced Composite (FRC)
HULL MATERIAL Fiberglass Reinforced Composite (FRC)
HULL TYPE Deep V
SPONSONS Standard
BOARDING STEP Standard
Yamaha Outboard 300hp Engine
Engine TypeV6Displacement4.2LBore x Stroke96 x 96mm (3.78 x 3.78 in)Prop Shaft Horsepower300hp at 5500 rpmFull Throttle RPM Range5000 ~ 6000 rpmAlternator Output at W.O.T.50 – 70 AmpCompression Ratio10.3:1Fuel Induction SystemEFIWeight †250 kg (551 lbs) / 254 kg (562 lbs) / 265 kg (588 lbs)Recommended FuelOctane 89Recommended Engine OilYamalube® 4M (See owner’s manual)Recommended Fuel FiltrationYamaha 10-Micron Fuel / Water Separating Filter (external)C.A.R.B. Rating3-StarExhaustThrough PropellerIntake24IgnitionTCI MicrocomputerSpark PlugLFR6A-11Alternator Output50 – 70 AmpStarting SystemElectricLubricationWet SumpEngine Oil Capacity6.3L/6.0LRecommended CoolingThermostatic ControlEthanol Blend Limit10% MaximumGear Ratio1.75:1Gear ShiftForward, Neutral, ReverseShaft Length25″ – 30″ – 35″ (F300 DEC Only)Degree of TiltMechanical 67°, Digital Electric Steering 69°, Bolt-on steering 70°Degree of Trim-3° through +16°Dry Weight with built-in DES25″ shaft 277 kg (611 lbs), 30″ shaft 283 kg (624 lbs), 35″ shaft 288 kg (635 lbs)Dry Weight without built-in DES25″ shaft 255 kg (562 lbs), 30″ shaft 261 kg (575 lbs), 35″ shaft 265 kg (588 lbs)Dry Weight with Mechanical Controls25″ shaft 255 kg (562 lbs)Mounting Centers28.5″SteeringIntegrated, Electric ActuationSteering Angle (maximum)32° from center, either directionWarrantyLimited 3-Year Pleasure, 3-Year Government, 1-Year Commercial
Makita LXT 15 Combo kits
– 1 x DHP456Z 18v LXT 2 Speed Combi Drill
– 1 x DSS610Z 18V 165mm Cordless Circular Saw
– 1 x DJR181Z 18V LXT Li-Ion Reciprocating Saw
– 1 x DTD146Z 18V Cordless Li-ion Impact Driver
– 1 x DGA452Z 18V 115mm Cordless Angle Grinder
– 1 x DTW251Z 18V Li-Ion Impact Wrench
– 1 x DHR241Z 18V Cordless SDS-Plus Rotary Hammer Drill
– 1 x DDA350Z 18V Li-Ion Cordless Angle Drill Drive
– 1 x DFS451Z 18V li-ion Drywall Screwdriver
– 1 x DTW450Z 18V Li-Ion Impact Wrench
– 1 x DCS550Z 18V Cordless Metal Cutting Saw
– 1 x DUB182Z 18V Blower
– 1 x DML184 14.4/18v Lithium-Ion Fluorescent Light
– 1 x DML185 18V Cordless Torch
– 1 x DMR104W Jobsite Radio-White
– 4 x BL1830 18.0V 3.0Ah Lithium-ion Batteries
– 2 x DC18RC 14.4-18V Lithium-ion Battery Chargers
– 1 x 831279-0 Contractor Bag with wheels and telescoping handle
– 1 x 831278-2 Contractor Bag
milwaukee m18 15 combo kits
INCLUDES:
(1) M18™ Compact Blower (0884-20)
(1) M18™ Compact 1/2″ Hammer Drill/Driver (2607-20)
(1) M18 ™ Cordless 5/8″ SDS Plus Rotary Hammer (2612-20)
(1) M18™ Cordless Right Angle Drill (2615-20)
(1) M18™ SAWZALL® Reciprocating Saw (2621-20)
(1) M18™ Multi-Tool (Tool Only) (2626-20)
(1) Band Saw (2629-20)
(1) M18™ 6 ½” Circular Saw (Tool Only) (2630-20)
(1) M18™ Jig Saw (2645-20)
(1) M18™ 1/4″ Hex Impact Driver (2656-20)
(1) M18™ 1/2″ Impact Wrench with Pin Detent (2659-20)
(1) M18™ 1/2″ High-Torque Impact Wrench with Friction Ring (2663-20)
(1) M18™ Cordless 4-1/2″ Cut-off / Grinder (2680-20)
(1) M18™ 5-3/8″ Metal Saw (2682-20)
(1) M18™ Work Light (2735-20)
(1) M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-1840)
(1) M18™ Six Pack Sequential Charger (48-59-1806)
CF MOTO 800cc
CF MOTO 800cc UTV Zforce
Mountain 72V 12000W enduro e bike
Manufacturer Name | Enduro E Bikes |
Model Name | 12000W light electric dirt bike |
Model Year | 2020 |
Motor Manufacturer | Enduro E Bikes |
Motor Model | Enduro E Bikes rear direct brushless motor |
Motor Power | 12kW (13hp, 31.1 ft-lbs equivalent) |
Motor Placement | Rear hub drive |
Controller | Sine Wave |
Power Pack | Panasonic Cells |
Battery Capacity | 72V 48Ah |
Battery Removal | Easy slide out |
Range | 32 miles |
Ride Mode | Throttle, pedal |
Regenerative Braking | N/A |
Throttle | Variable twist throttle |
Gears | 1 |
Top speed | 74.5mph |
Weight | 136.6lbs |
Materials | Steel, aircraft-grade aluminum |
Seat height | 25 inches |
Suspension | ZOOM AMS Downhill suspension forks DNM Burner-RCP 2S rear suspension |
Display | Full color TFT display (speedometer, odometer, tachometer, time, temperature, and power economy) |
Purpose | Dirt, Mud, Sand |
Connectivity | N/A |
Security | Keyed ignition |
yamaha boat

Weight 4,680 LBS
Beam 8′ 6″
Draft 19″
Dead Rise 20°
In-Water Height (Bridge Clearance) 8’1″
Seating Capacity/Weight Capacity 12/2,350 LBS
Storage Capacity 613 GAL
Integrated Swim Platform
Upholstered Cushioned Seats
Upholstered Cushioned Backrests Upgraded Upholstery
12-volt Outlet
Stainless Steel Telescopic Reboarding Ladder
Dinette Table Mount
Marine-Grade Mat Custom Cut
Stern (Wet) Storage
SEA DOO RXP X 300
TECHNICAL SPECIFICATIONS:
LENGTH (FT) 10.88
WIDTH (IN/MM) 49.2 / 1250
HEIGHT (IN/MM) 44 / 1110
DRY WEIGHT (LBS/KG) 780 / 354
FUEL CAPACITY (GAL/L) 18.5 / 70
STORAGE CAPACITY (CUFT/GAL/L) 4.8 / 40.6 / 153.7
SEATS:
NUMBER OF SEATS 2
EXTERIOR:
BODY MATERIAL Fiberglass Reinforced Composite (FRC)
HULL MATERIAL Fiberglass Reinforced Composite (FRC)
HULL TYPE Deep V
SPONSONS Standard
BOARDING STEP Standard
Yamaha Outboard 300hp Engine
Engine TypeV6Displacement4.2LBore x Stroke96 x 96mm (3.78 x 3.78 in)Prop Shaft Horsepower300hp at 5500 rpmFull Throttle RPM Range5000 ~ 6000 rpmAlternator Output at W.O.T.50 – 70 AmpCompression Ratio10.3:1Fuel Induction SystemEFIWeight †250 kg (551 lbs) / 254 kg (562 lbs) / 265 kg (588 lbs)Recommended FuelOctane 89Recommended Engine OilYamalube® 4M (See owner’s manual)Recommended Fuel FiltrationYamaha 10-Micron Fuel / Water Separating Filter (external)C.A.R.B. Rating3-StarExhaustThrough PropellerIntake24IgnitionTCI MicrocomputerSpark PlugLFR6A-11Alternator Output50 – 70 AmpStarting SystemElectricLubricationWet SumpEngine Oil Capacity6.3L/6.0LRecommended CoolingThermostatic ControlEthanol Blend Limit10% MaximumGear Ratio1.75:1Gear ShiftForward, Neutral, ReverseShaft Length25″ – 30″ – 35″ (F300 DEC Only)Degree of TiltMechanical 67°, Digital Electric Steering 69°, Bolt-on steering 70°Degree of Trim-3° through +16°Dry Weight with built-in DES25″ shaft 277 kg (611 lbs), 30″ shaft 283 kg (624 lbs), 35″ shaft 288 kg (635 lbs)Dry Weight without built-in DES25″ shaft 255 kg (562 lbs), 30″ shaft 261 kg (575 lbs), 35″ shaft 265 kg (588 lbs)Dry Weight with Mechanical Controls25″ shaft 255 kg (562 lbs)Mounting Centers28.5″SteeringIntegrated, Electric ActuationSteering Angle (maximum)32° from center, either directionWarrantyLimited 3-Year Pleasure, 3-Year Government, 1-Year Commercial
Makita LXT 15 Combo kits
– 1 x DHP456Z 18v LXT 2 Speed Combi Drill
– 1 x DSS610Z 18V 165mm Cordless Circular Saw
– 1 x DJR181Z 18V LXT Li-Ion Reciprocating Saw
– 1 x DTD146Z 18V Cordless Li-ion Impact Driver
– 1 x DGA452Z 18V 115mm Cordless Angle Grinder
– 1 x DTW251Z 18V Li-Ion Impact Wrench
– 1 x DHR241Z 18V Cordless SDS-Plus Rotary Hammer Drill
– 1 x DDA350Z 18V Li-Ion Cordless Angle Drill Drive
– 1 x DFS451Z 18V li-ion Drywall Screwdriver
– 1 x DTW450Z 18V Li-Ion Impact Wrench
– 1 x DCS550Z 18V Cordless Metal Cutting Saw
– 1 x DUB182Z 18V Blower
– 1 x DML184 14.4/18v Lithium-Ion Fluorescent Light
– 1 x DML185 18V Cordless Torch
– 1 x DMR104W Jobsite Radio-White
– 4 x BL1830 18.0V 3.0Ah Lithium-ion Batteries
– 2 x DC18RC 14.4-18V Lithium-ion Battery Chargers
– 1 x 831279-0 Contractor Bag with wheels and telescoping handle
– 1 x 831278-2 Contractor Bag
milwaukee m18 15 combo kits
INCLUDES:
(1) M18™ Compact Blower (0884-20)
(1) M18™ Compact 1/2″ Hammer Drill/Driver (2607-20)
(1) M18 ™ Cordless 5/8″ SDS Plus Rotary Hammer (2612-20)
(1) M18™ Cordless Right Angle Drill (2615-20)
(1) M18™ SAWZALL® Reciprocating Saw (2621-20)
(1) M18™ Multi-Tool (Tool Only) (2626-20)
(1) Band Saw (2629-20)
(1) M18™ 6 ½” Circular Saw (Tool Only) (2630-20)
(1) M18™ Jig Saw (2645-20)
(1) M18™ 1/4″ Hex Impact Driver (2656-20)
(1) M18™ 1/2″ Impact Wrench with Pin Detent (2659-20)
(1) M18™ 1/2″ High-Torque Impact Wrench with Friction Ring (2663-20)
(1) M18™ Cordless 4-1/2″ Cut-off / Grinder (2680-20)
(1) M18™ 5-3/8″ Metal Saw (2682-20)
(1) M18™ Work Light (2735-20)
(1) M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-1840)
(1) M18™ Six Pack Sequential Charger (48-59-1806)
CF MOTO 800cc
CF MOTO 800cc UTV Zforce
Mountain 72V 12000W enduro e bike
Manufacturer Name | Enduro E Bikes |
Model Name | 12000W light electric dirt bike |
Model Year | 2020 |
Motor Manufacturer | Enduro E Bikes |
Motor Model | Enduro E Bikes rear direct brushless motor |
Motor Power | 12kW (13hp, 31.1 ft-lbs equivalent) |
Motor Placement | Rear hub drive |
Controller | Sine Wave |
Power Pack | Panasonic Cells |
Battery Capacity | 72V 48Ah |
Battery Removal | Easy slide out |
Range | 32 miles |
Ride Mode | Throttle, pedal |
Regenerative Braking | N/A |
Throttle | Variable twist throttle |
Gears | 1 |
Top speed | 74.5mph |
Weight | 136.6lbs |
Materials | Steel, aircraft-grade aluminum |
Seat height | 25 inches |
Suspension | ZOOM AMS Downhill suspension forks DNM Burner-RCP 2S rear suspension |
Display | Full color TFT display (speedometer, odometer, tachometer, time, temperature, and power economy) |
Purpose | Dirt, Mud, Sand |
Connectivity | N/A |
Security | Keyed ignition |
yamaha boat

Weight 4,680 LBS
Beam 8′ 6″
Draft 19″
Dead Rise 20°
In-Water Height (Bridge Clearance) 8’1″
Seating Capacity/Weight Capacity 12/2,350 LBS
Storage Capacity 613 GAL
Integrated Swim Platform
Upholstered Cushioned Seats
Upholstered Cushioned Backrests Upgraded Upholstery
12-volt Outlet
Stainless Steel Telescopic Reboarding Ladder
Dinette Table Mount
Marine-Grade Mat Custom Cut
Stern (Wet) Storage
SEA DOO RXP X 300
TECHNICAL SPECIFICATIONS:
LENGTH (FT) 10.88
WIDTH (IN/MM) 49.2 / 1250
HEIGHT (IN/MM) 44 / 1110
DRY WEIGHT (LBS/KG) 780 / 354
FUEL CAPACITY (GAL/L) 18.5 / 70
STORAGE CAPACITY (CUFT/GAL/L) 4.8 / 40.6 / 153.7
SEATS:
NUMBER OF SEATS 2
EXTERIOR:
BODY MATERIAL Fiberglass Reinforced Composite (FRC)
HULL MATERIAL Fiberglass Reinforced Composite (FRC)
HULL TYPE Deep V
SPONSONS Standard
BOARDING STEP Standard
Yamaha Outboard 300hp Engine
Engine TypeV6Displacement4.2LBore x Stroke96 x 96mm (3.78 x 3.78 in)Prop Shaft Horsepower300hp at 5500 rpmFull Throttle RPM Range5000 ~ 6000 rpmAlternator Output at W.O.T.50 – 70 AmpCompression Ratio10.3:1Fuel Induction SystemEFIWeight †250 kg (551 lbs) / 254 kg (562 lbs) / 265 kg (588 lbs)Recommended FuelOctane 89Recommended Engine OilYamalube® 4M (See owner’s manual)Recommended Fuel FiltrationYamaha 10-Micron Fuel / Water Separating Filter (external)C.A.R.B. Rating3-StarExhaustThrough PropellerIntake24IgnitionTCI MicrocomputerSpark PlugLFR6A-11Alternator Output50 – 70 AmpStarting SystemElectricLubricationWet SumpEngine Oil Capacity6.3L/6.0LRecommended CoolingThermostatic ControlEthanol Blend Limit10% MaximumGear Ratio1.75:1Gear ShiftForward, Neutral, ReverseShaft Length25″ – 30″ – 35″ (F300 DEC Only)Degree of TiltMechanical 67°, Digital Electric Steering 69°, Bolt-on steering 70°Degree of Trim-3° through +16°Dry Weight with built-in DES25″ shaft 277 kg (611 lbs), 30″ shaft 283 kg (624 lbs), 35″ shaft 288 kg (635 lbs)Dry Weight without built-in DES25″ shaft 255 kg (562 lbs), 30″ shaft 261 kg (575 lbs), 35″ shaft 265 kg (588 lbs)Dry Weight with Mechanical Controls25″ shaft 255 kg (562 lbs)Mounting Centers28.5″SteeringIntegrated, Electric ActuationSteering Angle (maximum)32° from center, either directionWarrantyLimited 3-Year Pleasure, 3-Year Government, 1-Year Commercial
Makita LXT 15 Combo kits
– 1 x DHP456Z 18v LXT 2 Speed Combi Drill
– 1 x DSS610Z 18V 165mm Cordless Circular Saw
– 1 x DJR181Z 18V LXT Li-Ion Reciprocating Saw
– 1 x DTD146Z 18V Cordless Li-ion Impact Driver
– 1 x DGA452Z 18V 115mm Cordless Angle Grinder
– 1 x DTW251Z 18V Li-Ion Impact Wrench
– 1 x DHR241Z 18V Cordless SDS-Plus Rotary Hammer Drill
– 1 x DDA350Z 18V Li-Ion Cordless Angle Drill Drive
– 1 x DFS451Z 18V li-ion Drywall Screwdriver
– 1 x DTW450Z 18V Li-Ion Impact Wrench
– 1 x DCS550Z 18V Cordless Metal Cutting Saw
– 1 x DUB182Z 18V Blower
– 1 x DML184 14.4/18v Lithium-Ion Fluorescent Light
– 1 x DML185 18V Cordless Torch
– 1 x DMR104W Jobsite Radio-White
– 4 x BL1830 18.0V 3.0Ah Lithium-ion Batteries
– 2 x DC18RC 14.4-18V Lithium-ion Battery Chargers
– 1 x 831279-0 Contractor Bag with wheels and telescoping handle
– 1 x 831278-2 Contractor Bag
milwaukee m18 15 combo kits
INCLUDES:
(1) M18™ Compact Blower (0884-20)
(1) M18™ Compact 1/2″ Hammer Drill/Driver (2607-20)
(1) M18 ™ Cordless 5/8″ SDS Plus Rotary Hammer (2612-20)
(1) M18™ Cordless Right Angle Drill (2615-20)
(1) M18™ SAWZALL® Reciprocating Saw (2621-20)
(1) M18™ Multi-Tool (Tool Only) (2626-20)
(1) Band Saw (2629-20)
(1) M18™ 6 ½” Circular Saw (Tool Only) (2630-20)
(1) M18™ Jig Saw (2645-20)
(1) M18™ 1/4″ Hex Impact Driver (2656-20)
(1) M18™ 1/2″ Impact Wrench with Pin Detent (2659-20)
(1) M18™ 1/2″ High-Torque Impact Wrench with Friction Ring (2663-20)
(1) M18™ Cordless 4-1/2″ Cut-off / Grinder (2680-20)
(1) M18™ 5-3/8″ Metal Saw (2682-20)
(1) M18™ Work Light (2735-20)
(1) M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-1840)
(1) M18™ Six Pack Sequential Charger (48-59-1806)
CF MOTO 800cc
CF MOTO 800cc UTV Zforce

Home Entertainment
Mountain 72V 12000W enduro e bike
Manufacturer Name | Enduro E Bikes |
Model Name | 12000W light electric dirt bike |
Model Year | 2020 |
Motor Manufacturer | Enduro E Bikes |
Motor Model | Enduro E Bikes rear direct brushless motor |
Motor Power | 12kW (13hp, 31.1 ft-lbs equivalent) |
Motor Placement | Rear hub drive |
Controller | Sine Wave |
Power Pack | Panasonic Cells |
Battery Capacity | 72V 48Ah |
Battery Removal | Easy slide out |
Range | 32 miles |
Ride Mode | Throttle, pedal |
Regenerative Braking | N/A |
Throttle | Variable twist throttle |
Gears | 1 |
Top speed | 74.5mph |
Weight | 136.6lbs |
Materials | Steel, aircraft-grade aluminum |
Seat height | 25 inches |
Suspension | ZOOM AMS Downhill suspension forks DNM Burner-RCP 2S rear suspension |
Display | Full color TFT display (speedometer, odometer, tachometer, time, temperature, and power economy) |
Purpose | Dirt, Mud, Sand |
Connectivity | N/A |
Security | Keyed ignition |
yamaha boat

Weight 4,680 LBS
Beam 8′ 6″
Draft 19″
Dead Rise 20°
In-Water Height (Bridge Clearance) 8’1″
Seating Capacity/Weight Capacity 12/2,350 LBS
Storage Capacity 613 GAL
Integrated Swim Platform
Upholstered Cushioned Seats
Upholstered Cushioned Backrests Upgraded Upholstery
12-volt Outlet
Stainless Steel Telescopic Reboarding Ladder
Dinette Table Mount
Marine-Grade Mat Custom Cut
Stern (Wet) Storage
Laptops & Computers
Trending Products
Bestseller
Top Categories of this Month
Recently Viewed
Mountain 72V 12000W enduro e bike
Manufacturer Name | Enduro E Bikes |
Model Name | 12000W light electric dirt bike |
Model Year | 2020 |
Motor Manufacturer | Enduro E Bikes |
Motor Model | Enduro E Bikes rear direct brushless motor |
Motor Power | 12kW (13hp, 31.1 ft-lbs equivalent) |
Motor Placement | Rear hub drive |
Controller | Sine Wave |
Power Pack | Panasonic Cells |
Battery Capacity | 72V 48Ah |
Battery Removal | Easy slide out |
Range | 32 miles |
Ride Mode | Throttle, pedal |
Regenerative Braking | N/A |
Throttle | Variable twist throttle |
Gears | 1 |
Top speed | 74.5mph |
Weight | 136.6lbs |
Materials | Steel, aircraft-grade aluminum |
Seat height | 25 inches |
Suspension | ZOOM AMS Downhill suspension forks DNM Burner-RCP 2S rear suspension |
Display | Full color TFT display (speedometer, odometer, tachometer, time, temperature, and power economy) |
Purpose | Dirt, Mud, Sand |
Connectivity | N/A |
Security | Keyed ignition |
yamaha boat

Weight 4,680 LBS
Beam 8′ 6″
Draft 19″
Dead Rise 20°
In-Water Height (Bridge Clearance) 8’1″
Seating Capacity/Weight Capacity 12/2,350 LBS
Storage Capacity 613 GAL
Integrated Swim Platform
Upholstered Cushioned Seats
Upholstered Cushioned Backrests Upgraded Upholstery
12-volt Outlet
Stainless Steel Telescopic Reboarding Ladder
Dinette Table Mount
Marine-Grade Mat Custom Cut
Stern (Wet) Storage
SEA DOO RXP X 300
TECHNICAL SPECIFICATIONS:
LENGTH (FT) 10.88
WIDTH (IN/MM) 49.2 / 1250
HEIGHT (IN/MM) 44 / 1110
DRY WEIGHT (LBS/KG) 780 / 354
FUEL CAPACITY (GAL/L) 18.5 / 70
STORAGE CAPACITY (CUFT/GAL/L) 4.8 / 40.6 / 153.7
SEATS:
NUMBER OF SEATS 2
EXTERIOR:
BODY MATERIAL Fiberglass Reinforced Composite (FRC)
HULL MATERIAL Fiberglass Reinforced Composite (FRC)
HULL TYPE Deep V
SPONSONS Standard
BOARDING STEP Standard
Yamaha Outboard 300hp Engine
Engine TypeV6Displacement4.2LBore x Stroke96 x 96mm (3.78 x 3.78 in)Prop Shaft Horsepower300hp at 5500 rpmFull Throttle RPM Range5000 ~ 6000 rpmAlternator Output at W.O.T.50 – 70 AmpCompression Ratio10.3:1Fuel Induction SystemEFIWeight †250 kg (551 lbs) / 254 kg (562 lbs) / 265 kg (588 lbs)Recommended FuelOctane 89Recommended Engine OilYamalube® 4M (See owner’s manual)Recommended Fuel FiltrationYamaha 10-Micron Fuel / Water Separating Filter (external)C.A.R.B. Rating3-StarExhaustThrough PropellerIntake24IgnitionTCI MicrocomputerSpark PlugLFR6A-11Alternator Output50 – 70 AmpStarting SystemElectricLubricationWet SumpEngine Oil Capacity6.3L/6.0LRecommended CoolingThermostatic ControlEthanol Blend Limit10% MaximumGear Ratio1.75:1Gear ShiftForward, Neutral, ReverseShaft Length25″ – 30″ – 35″ (F300 DEC Only)Degree of TiltMechanical 67°, Digital Electric Steering 69°, Bolt-on steering 70°Degree of Trim-3° through +16°Dry Weight with built-in DES25″ shaft 277 kg (611 lbs), 30″ shaft 283 kg (624 lbs), 35″ shaft 288 kg (635 lbs)Dry Weight without built-in DES25″ shaft 255 kg (562 lbs), 30″ shaft 261 kg (575 lbs), 35″ shaft 265 kg (588 lbs)Dry Weight with Mechanical Controls25″ shaft 255 kg (562 lbs)Mounting Centers28.5″SteeringIntegrated, Electric ActuationSteering Angle (maximum)32° from center, either directionWarrantyLimited 3-Year Pleasure, 3-Year Government, 1-Year Commercial
Makita LXT 15 Combo kits
– 1 x DHP456Z 18v LXT 2 Speed Combi Drill
– 1 x DSS610Z 18V 165mm Cordless Circular Saw
– 1 x DJR181Z 18V LXT Li-Ion Reciprocating Saw
– 1 x DTD146Z 18V Cordless Li-ion Impact Driver
– 1 x DGA452Z 18V 115mm Cordless Angle Grinder
– 1 x DTW251Z 18V Li-Ion Impact Wrench
– 1 x DHR241Z 18V Cordless SDS-Plus Rotary Hammer Drill
– 1 x DDA350Z 18V Li-Ion Cordless Angle Drill Drive
– 1 x DFS451Z 18V li-ion Drywall Screwdriver
– 1 x DTW450Z 18V Li-Ion Impact Wrench
– 1 x DCS550Z 18V Cordless Metal Cutting Saw
– 1 x DUB182Z 18V Blower
– 1 x DML184 14.4/18v Lithium-Ion Fluorescent Light
– 1 x DML185 18V Cordless Torch
– 1 x DMR104W Jobsite Radio-White
– 4 x BL1830 18.0V 3.0Ah Lithium-ion Batteries
– 2 x DC18RC 14.4-18V Lithium-ion Battery Chargers
– 1 x 831279-0 Contractor Bag with wheels and telescoping handle
– 1 x 831278-2 Contractor Bag
milwaukee m18 15 combo kits
INCLUDES:
(1) M18™ Compact Blower (0884-20)
(1) M18™ Compact 1/2″ Hammer Drill/Driver (2607-20)
(1) M18 ™ Cordless 5/8″ SDS Plus Rotary Hammer (2612-20)
(1) M18™ Cordless Right Angle Drill (2615-20)
(1) M18™ SAWZALL® Reciprocating Saw (2621-20)
(1) M18™ Multi-Tool (Tool Only) (2626-20)
(1) Band Saw (2629-20)
(1) M18™ 6 ½” Circular Saw (Tool Only) (2630-20)
(1) M18™ Jig Saw (2645-20)
(1) M18™ 1/4″ Hex Impact Driver (2656-20)
(1) M18™ 1/2″ Impact Wrench with Pin Detent (2659-20)
(1) M18™ 1/2″ High-Torque Impact Wrench with Friction Ring (2663-20)
(1) M18™ Cordless 4-1/2″ Cut-off / Grinder (2680-20)
(1) M18™ 5-3/8″ Metal Saw (2682-20)
(1) M18™ Work Light (2735-20)
(1) M18™ REDLITHIUM™ XC 4.0 Extended Capacity Battery Pack (48-11-1840)
(1) M18™ Six Pack Sequential Charger (48-59-1806)